德國BURKERT二位二通氣動閥安裝說明

 Measured as overpressure to the atmospheric pressure Response times [ms]:
Opening  Closing Measured at valve outlet at 6 bar and +20ºC. Pressure relief 0 90% Pressure drop 100 to 10%
動作快遞，功率微小，外形輕巧
電磁閥響應時間可以短幾個毫秒，即使是導式電磁閥也可以控制在幾十毫秒內。
外殼材料：黃銅、不銹鋼、
還可做到只需觸發動作，自動保持閥位，平時點也不耗電。
Circuit Function B 2/2-way valve, externally controlled, normally opened by spring, operation with pilot valve
Type 0262 can be combined with.
• Normally closed or open • Body material: Brass, Stainless steel
• Double spindle seal • Compact design
電磁閥外形尺寸小，既節省空間，又輕巧美觀。
調節精度受限，適用介質受限
neutral medium (e.g. compressed air, town gas, water, hydraulic oil) per-solution, oxygen, hot air oil and fat-free medium e.g. hot water,
 alkaline washing and bleaching lyes oil and fat-free medium, e.g. hot water and steam
hot oils, hydrocarbonated water, aromatics and steam
隔膜驅動裝置能夠使主軸
連同閥錐朝彈簧的方向運動，進而接通閥門。
主軸設計有雙層密封件，但沒有壓蓋。
另外，粘稠狀介質不能適用，而且，特定的產品適用的介質粘度范圍相對較窄。
Technical data Body material Brass, stainless steel Inner part valve Stainless steel Actuator
 Epoxy resin Seal material NBR, FKM, PTFE/FKM, EPDM, PTFE/EPDM Medium  NBR
 PTFE/EPDM (PFTE seal with EPDM O-Ring) PTFE/FKM (PTFE seal with FKM O-Ring)
電磁閥通常只有開關兩種狀態，閥芯只能處于兩個限位置，
驅動裝置外殼由環氧樹脂構成。
無流量時關閉或打開
measured at +20°C, 1 bar pressure at valve inlet and free outlet Pressure values [bar]
-10 up to +140 ºC Control medium neutral gases and liquids, in particular air, water, hydraulic liquids up to max. +90 ºC
Pilot pressure see diagram Ambient temperature -10 up to +90 ºC Installation As required, preferably with actuator upright
Flow rate Kv value water [m3/h]:

德國BURKERT二位二通氣動閥安裝說明
由于自成回路，比之其它自控閥反應更靈敏。
緊湊型結構
2/2-way valve for medium up to +140ºC
The externally controlled valve is pneumatically operated. It consists of a diaphragm actuator and a 2-way valve body.
雙主軸密封件
這種外部控制的直通閥經由氣動操作。
它由個隔膜驅動裝置和個二通閥套構成。
Circuit function A 2/2-way valve, externally controlled, normally closed by spring operation with pilot valve
Viscosity max. 100 mm2/s Medium temperature NBR FKM EPDM PTFE/EPDM PTFE/FKM -10 up to +  90 ºC -10 up to +100 ºC -10 up to +100 ºC -10 up to +140 ºC
設計得當的電磁閥線圈功率消耗很低，屬節能產品；
The diaphragm actuator moves a spindle with valve disc against a spring and switches the valve.
 The spindle is designed glandless with double seal.
The actuator body is made out of epoxy resin.
不能連續調節，所以調節精度還受到定限制。
電磁閥對介質潔凈度有較高要求，含顆粒狀的介質不能適用，如屬雜質須濾去。